Red HCF 3.78ltr
Performix® HCF® Flexible Acrylic Water Based Coating 3.78 litres.
A Flexible Specialty Acrylic Coating
Red HCF (Hard Coat Finish) Multi-Purpose flexible acrylic water based coating. 3.78 Ltr Can.
HCF® is a flexible acrylic, water base coating. It's very low V.O.C.'s, non-flammable and high solids content make it an Emission Control Coating System, eccs®, that can be air dried or heat cured to meet production demands. HCF® can be sprayed, dipped or brushed, is available in a wide variety of colours and exhibits excellent petroleum, chemical, UV, corrosion and abrasion resistance. Typical applications include protecting and colour coding transformers, coils, tools, fixtures and brackets, oil handling equipment, heavy machinery, and chain link fence components. HCF® bonds to metal, wood, concrete and plastics without primers. HCF® has the safety of water base with the performance of solvent base coatings.
Performix® HCF® Flexible Acrylic Water Based Coating 3.78 litres.
A Flexible Specialty Acrylic Coating
Red HCF (Hard Coat Finish) Multi-Purpose flexible acrylic water based coating. 3.78 Ltr Can.
DESCRIPTION:
HCF® is a flexible acrylic, water base coating. It's very low V.O.C.'s, non-flammable and high solids content make it an Emission Control Coating System, eccs®, that can be air dried or heat cured to meet production demands. HCF® can be sprayed, dipped or brushed, is available in a wide variety of colours and exhibits excellent petroleum, chemical, UV, corrosion and abrasion resistance. Typical applications include protecting and colour coding transformers, coils, tools, fixtures and brackets, oil handling equipment, heavy machinery, and chain link fence components. HCF® bonds to metal, wood, concrete and plastics without primers. HCF® has the safety of water base with the performance of solvent base coatings.
HINTS:
For storage or dip tank containers, use only poly or galvanized steel. A dry film thickness of 6-8 mils is
recommended for best results. Allow overnight drying whenever possible. To speed drying, mild heat (95°F -110°F) and air flow may be used. Do not stack or store parts in contact with each other if not fully cured. Avoid excessive air movement, heat or humidity. Always use proper ventilation and protection.
Dielectric: (ASTM D -149) 1,100 v/mil
If you are tired of peeling or cracking paint, try HCF!
Refer to technical data sheets for more information.
