0 Item(s)
» Plasti Dip» 18.9L UV Car Kits» Clear 18.9 PDUV CarKit+SGun
Clear 18.9 PDUV CarKit+SGun

Clear 18.9ltr PDipUV + 1 x 20ltr Thinner + MS2901 Spray Stn

Product Details:

Clear 1 x 18.9 Litre Plasti Dip UV Flexible Rubber Coating, 1 x Earlex MS2901 Spray Station, 1 x 20 litre Thinners. (Makes 37.8 litres of Sprayable Plasti Dip at recommended 1:1 thinning ratio - sufficient for 3 small to average sized vehicles

$2,702.50 Inc GST
Add To Cart
Available
1-10509-UV-CKSG
18.9L UV Car Kits
Shipment Calculator
Product Description
Resources
Clear 18.9 PDUV CarKit+SGun

Clear 1 x 18.9 Litre Plasti Dip UV Flexible Rubber Coating, 1 x Earlex MS2901 Spray Station, 1 x 20 litre Thinners. (Makes 37.8 litres of Sprayable Plasti Dip at recommended 1:1 thinning ratio - sufficient for 3 small to average sized vehicles.

• Plasti Dip can be easily applied by dipping, brushing, or spraying (thin with Plasti Dip Thinner for spraying - available in 20 litre drums).

• Plasti Dip protective coating is ideal for a broad array of do-it-yourself projects around the home, garage, garden and elsewhere. It protects coated items against moisture, acids, abrasion, corrosion, skidding/slipping, and provides a comfortable, controlled grip.

• Plasti Dip remains flexible and stretchy over time and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -34ºc to +93ºc.

• If the coating gets damaged or wears out, or if you just want to change the look of your Plasti Dipped project, Plasti Dip peels off easily from most surfaces, leaving the material underneath in its original, pre-Dipped condition.

• Plasti Dip coats and gives a comfortable, controlled, colour coded grip to all types of tools: lawn and garden, mechanical, electrical, woodworking and masonry. (Non-skid grit can also be added.)

Not only is this stuff good, IT'S FUN!!

• Surfaces which are non-absorbent such as metals should be primed using our recommended Primer which is available in Clear colour. Size: 311 gram Aerosol. DO NOT use Primer if you wish to remove the Plasti Dip in the future.

PLASTI DIP® is not just for tool handles.

• Plasti Dip can be used on Paper, Tools, Arts and Crafts, Lawn Equipment, electrical connections, Rope and Fabric, Wood, Metal, Glass, Plastics, Rubber, Fibreglass, Chair and Table Legs…. and more.

Structural concrete:

Sealing block walls - Roadway structures - Swimming pools - Foundations - Fountains - Walls and ceilings in processing plants - (wherever concrete deterioration is a problem)

Structural Steel:

Joists and Beams - Metals (subjected to any corrosive environment) - Bridges - Cushions Hand Rails - Railings - Storage towers - Below ground tanks - Exposed machinery

Wherever metal is attacked - Plasti Dip performs!

Transformers, Cables / Straps, Rope, Wood, Joy Sticks, Circuit Boards, Electrical Boxes placed on the ground, Magnets, Stove/Oven handles, Fabric, LaCrosse Sticks/Nets, Astro Turf, Food Grade Barrels, Crutch Handles, Control Boxes, Relay, Electric Winch, Metal Grates, Sharp edges, Pumps, Hand Tools, Valves / Actuators, Curtains, Pulleys & Rings, Clips, Poles, Glass, Underground tanks, Pipes, Hardware & Metal surfaces to prevent electrical discharge & sparks.

• For coverage and other technical information, please refer to the Manufacturer's Technical Data Sheet, Tips, FAQ and 1001 uses sheets.

Please note that product/swatch colours are a representation of the actual product and may vary depending on your monitor and/or browser settings.

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combinations for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing V.O.C. regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact Plastic Dips & Coatings technical service sales@plastidip.net.au or the contact details on our website.