Plasti Dip® 311gram Spray - Single Can
1 can Blaze Blue Neon 311 gram Aerosol Can Plasti Dip UV Formula Multi-Purpose, Air Dried, Removable/Peelable, Specialty Flexible Rubber Coating.
MULTI-PURPOSE RUBBER COATING
Plasti Dip is an air-dry, specialty rubber coating. In fact, it’s the original peelable, flexible, insulating, non-slip, durable rubber coating. The Plasti Dip product line provides a wide range of coating solutions from automotive customization to home improvement.
ATTRIBUTES OF PLASTI DIP®
- For the brightest possible colours, it's best to apply Plasti Dip Blaze colours over a white base, preferably white Plasti Dip for optimum adhesion.
- Available Neon Colours: Blaze Blue, Blaze Orange, Blaze Pink, Blaze Yellow, Blaze Green, Blaze Purple.
- All colours of Plasti Dip Blaze are available in convenient 311 gram aerosol cans. Just shake it up and spray it on to give any DIY project a vivid, attention-grabbing look.
- Plasti Dip Blaze is a unique collection of neon Plasti Dip colours that deliver eye-catching looks for any application. Use Plasti Dip Blaze anywhere you need bright, easy to see colours—you can use it to improve visibility for safety concerns, to add can’t-miss colour to frequently misplaced items, or for a one-of-a-kind look on almost anything, from automotive projects to outdoor gear to arts and crafts.
- Plasti Dip Blaze is available in six eye-catching colours. The Blaze collection applies quickly and easily to nearly any substrate material, and creates a protective coating to shield against abrasion, corrosion, mild impact and the elements. Plasti Dip Blaze also creates a soft, easy-grip surface that helps prevent skidding and slipping.
- Easy to use application
- Convenient Spray for those hard-to-reach places
- Tip Can upside down and clear nozzle after each use to prevent clogging of the nozzle
- Protects coated items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip
- Insulates electrically and thermally. Dielectric: (ASTM D-1 49) 1 ,400v/mil
- Peelable and removable from of most surfaces
- Customers are using this product to coat their wheel rims and usually purchase between 4-6 cans. The average usage to coat wheel rims is 1 can per rim. We recommend 5-7 thin coats of Plasti Dip to get good coverage, this will make it easier to peel off the Plasti Dip if required.
- If the coating gets damaged or wears out, or if you just want to change the look of your Plasti Dipped project, Plasti Dip peels off easily from most surfaces, leaving the material underneath in its original, pre-Dipped condition
- Remains flexible and stretchy over time
- Will not crack or become brittle in extreme weather conditions
- Proven in temperatures from -30°F to 200°F (-34ºc to +93ºc.)
- Using Plasti Dip Spray in cooler temperatures may affect drying times, finish quality, and spray performance. If you plan on spraying your project in cooler conditions, we recommend pre-warming the aerosol can by placing it in a warm room and allowing the contents to reach room temperature. Under no circumstances should users subject the aerosol can to temperatures above 120°F or use heat from an open flame or other sources of ignition to pre-warm the spray can. Additionally, cooler conditions may affect the surface you are spraying. If you are concerned about spraying your project in cooler temperatures, test in an inconspicuous area first to ensure the resulting finish will be what you’re looking for. Tip Can upside down and clear nozzle after each use to prevent clogging of the nozzle.
- Plasti Dip can be easily applied by dipping, brushing, or spraying (thin with Plasti Dip Thinner for spraying - available in 20 litre drums).
- Plasti Dip protective coating is ideal for a broad array of do-it-yourself projects around the home, garage, garden and elsewhere. It protects coated items against moisture, acids, abrasion, corrosion, skidding/slipping, and provides a comfortable, controlled grip.
- Plasti Dip coats and gives a comfortable, controlled, colour coded grip to all types of tools: lawn and garden, mechanical, electrical, woodworking and masonry. (Non-skid grit can also be added.)
- Surfaces which are non-absorbent such as metals should be primed using our recommended Primer which is available in Clear colour. Size: 311 gram Aerosol. DO NOT use Primer if you wish to remove the Plasti Dip in the future.
- PLASTI DIP® is not just for tool handles. Paint onto, spray or dip almost anything! Add more layers for greater protection or grip. Plasti Dip can be used on Paper, Tools, Arts and Crafts, Lawn Equipment, electrical connections, Rope and Fabric, Wood, Metal, Glass, Plastics, Rubber, Fibreglass, Chair and Table Legs…. and more.
- Structural concrete: Sealing block walls - Roadway structures - Swimming pools - Foundations - Fountains - Walls and ceilings in processing plants - (wherever concrete deterioration is a problem)
- Structural Steel: Joists and Beams - Metals (subjected to any corrosive environment) - Bridges - Cushions Hand Rails - Railings - Storage towers - Below ground tanks - Exposed machinery
- Wherever metal is attacked - Plasti Dip performs! Transformers, Cables / Straps, Rope, Wood, Joy Sticks, Circuit Boards, Electrical Boxes placed on the ground, Magnets, Stove/Oven handles, Fabric, LaCrosse Sticks/Nets, Astro Turf, Food Grade Barrels, Crutch Handles, Control Boxes, Relay, Electric Winch, Metal Grates, Sharp edges, Pumps, Hand Tools, Valves / Actuators, Curtains, Pulleys & Rings, Clips, Poles, Glass, Underground tanks, Pipes, Hardware & Metal surfaces to prevent electrical discharge & sparks.
- For coverage and other technical information, please refer to the Manufacturer's Technical Data Sheet, Tips, FAQ and 1001 uses sheets.
- See product labels for further information.
- Not only is this stuff good, IT'S FUN!!
