50's Aqua PDipUV PT 3.78 ltr

Plasti Dip® 3.78litre Sprayable - Single Can

1 can 50's Aqua Muscle Colour 3.78litre Plasti Dip Performix UV Pre-thinned Sprayable Formula Multi-Purpose, Air Dried, Removable/Peelable Flexible Rubber Specialty Coating. No Base Coats required. No Fading. Protects coated items against moisture, acids, abrasion, corrosion, skidding/slipping and provides a comfortable, controlled grip. 

MULTI-PURPOSE RUBBER COATING

Plasti Dip is an air-dry, specialty rubber coating. In fact, it’s the original peelable, flexible, insulating, non-slip, durable rubber coating. The Plasti Dip product line provides a wide range of coating solutions from automotive customization to home improvement.

MOTOR VEHICLES

• We recommend you wash the vehicle or item with warm water and dishwashing liquid. If there are any greasy or waxy areas we recommend using rubbing alcohol to remove them. Do not use a car wash with silicone before spraying as Plasti Dip will not stick to silicone.
• We recommend 5-7 spray coats of Plasti Dip to ensure a thick enough coating so that it can be easily removed if/when required. It will take approx 4 spray coats to start to get good coverage.
• We DO NOT recommend you use Prepsol as this causes static to build up which gives a very rough, furry finish to the Plasti Dip.
• Mask up any areas that you do not want coated and cover your wheels, brakes, etc., if you are not removing the wheels.
• The Plasti Dip can then be applied. You will need a HVLP spray gun that will run at 20psi with a 1.3-1.5mil needle, maximum 2mil needle.
• The Earlex MS2901 HVLP Spray Station Gun is specifically designed to apply Plasti Dip and is available here.
• If the Plasti Dip comes out of the gun at a high psi the Plasti Dip will dry before hitting the surface and will give a sandpaper finish. It is recommended that the spray gun be held 6-8” away from the surface, otherwise the Plasti Dip will dry before hitting the surface and give a sandpaper type finish. If you get runs you are probably too close or spraying too heavily.
• It is recommended that you remove any tape whilst the last coat of Plasti Dip is still wet to avoid the Plasti Dip sticking to the tape.
• Average Usage: A small vehicle uses approx. 2 x 3.78 litres, a medium vehicle 3 x 3.78 litres and a large vehicle 4 x 3.78 litres and a larger 4WD 5 x 3.78 litres. These are a guide only as there are many variables such as overspray.
• If you are putting a light coloured Plasti Dip over a dark coloured vehicle you will probably use more. It is recommended to put a base of grey Plasti Dip on first if you are applying a light colour over a dark colour to avoid the dark colour showing through. This should also decrease the amount of the lighter coloured Plasti Dip required.
• If you are using powders it is strongly recommended to put them over at least 4 coats of regular Plasti Dip to avoid problems.
• If you are applying Plasti Dip over a bare metal surface we recommend you use the Plasti Dip Primer first. The Plasti Dip needs to be applied as soon as the Primer is touch dry to get maximum adhesion. 
• We DO NOT recommend you use Plasti Dip Primer on vehicles/Items if you wish to remove the Plasti Dip at a later date.

PIGMENTS - ENHANCERS

• Pro FX Pigments and Sparkles/Flakes are available to give your project a unique look.
• 3.78 litre Top Coat Enhancers available in Gloss, High Gloss, Gold Metalizer, Silver Metalizer and Pearlizer.
  

• No Base Coats required. No Fading.
• Easy to use application
• Protects coated items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip
  
• Plasti Dip coats and gives a comfortable, controlled, colour coded grip to all types of tools: lawn and garden, mechanical, electrical, woodworking and masonry. (Non-skid grit can also be added.)
• Insulates electrically and thermally. Dielectric: (ASTM D-1 49) 1 ,400v/mil
• Peelable and removable from of most surfaces
• If you require a permanent coating - surfaces which are non-absorbent such as metals should be primed using our recommended Primer which is available in a Clear colour 311 gram Aerosol. DO NOT use Primer if you wish to remove the Plasti Dip in the future.
• If the coating gets damaged or wears out, or if you just want to change the look of your Plasti Dipped project, Plasti Dip peels off easily from most surfaces, leaving the material underneath in its original, pre-Dipped condition
  
• Remains flexible and stretchy over time
• Will not crack or become brittle in extreme weather conditions
• Proven in temperatures from -30°F to 200°F (-34ºc to +93ºc.)
• Plasti Dip can be easily applied by dipping, brushing, or spraying (thin with Plasti Dip Thinner for spraying - available in 4 litre and 20 litre cans).
  
• Plasti Dip protective coating is ideal for a broad array of do-it-yourself projects around the home, garage, garden and elsewhere. It protects coated items against moisture, acids, abrasion, corrosion, skidding/slipping, and provides a comfortable, controlled grip.
• PLASTI DIP® is not just for tool handles. Paint onto, spray or dip almost anything! Add more layers for greater protection or grip.